2 t – 5 t – 10 t – 20 t – 30 t – 60 t
Explanation:
PLC pin type strain gauges are specially designed for crane systems. They are mounted on the balance roller of the crane’s lifting mechanism and take into account the load exerted on the roller.
With its steel alloy construction coated with corrosion-resistant paint, as well as the strain gauge area welded with a stainless steel cover, the PLC is protected according to the IP68 standard, which means full water resistance.
PLC strain gauges provide:
Overload control for cranes and lifting machines
Measuring the weight of the load being lifted
Features:
• Industrial protection IP68
Accessories:
• Junction Box (J Box)
| Parameter | Unit | Value | |||||||
| Maximum capacity (Emax) | kg | 2000, 5000, 10000, 15000, 20000, 30000, 60000 | |||||||
| Accuracy (OIML R60) | |||||||||
| Maximum number of check intervals | |||||||||
| Minimum check interval | |||||||||
| Combined error | % | ≤ ±1.0 | |||||||
| Crawl Error (30 min) (DR) | %Emax | ||||||||
| Maximum safe overload | %Emax | 150 | |||||||
| Maximum Safe Lateral Load | %Emax | 300 | |||||||
| End Load | %Emax | ||||||||
| Stretch (Emax) | mm | ||||||||
| Maximum supply voltage (Umax) | V | ||||||||
| Supply Current | mA | 10 | |||||||
| Output signal (at rated load) | Sayım | 1mV/V | |||||||
| Analog to Digital Converter (Sigma Delta) | bit | ≤ ±5.0 | |||||||
| A/D converter speed | Hz | 730 ±20 | |||||||
| Asynchronous communication speed | Baud | 700 ±20 | |||||||
| Data interface | ≥500 | ||||||||
| Angle measurement error | degree | -10…+40 | |||||||
| Insulation Voltage | V | -40…+80 | |||||||
| Temperature compensation range | °C | Steel | |||||||
| Operating temperature range | °C | IP68 | |||||||
| Strain gauge material | 5±%3 | ||||||||
| Sealing (EN60529) | 5 | ||||||||
| Weight | kg |
|
|||||||
| Package Dimensions / Weight | cm/kg |
|
