Explanation
Ethernet+ is a device that converts RS232 serial port of indicators to Modbus/TCP protocol. Through this conversion, the data from each indicator can be read from the existing network via the serial port with Modbus protocol and sent to a remote display, PLC or PC.
Ethernet+ is the most efficient option for remote reading of indicator data and for integrating the weighing system into an existing monitoring and control system.
| Parameter | Value |
| General Features | |
| Power | 12-24 VDC |
| Operating temperature | -20°C to +70°C |
| Sizes | 105mm x 60mm x 35mm |
| LED indicators | Cloud Error, Cloud Connect, Serial RX, Serial TX |
| Serial communication interface | |
| Baud rate | 9600-115200 bps |
| Number of data bits | 8 |
| Parity | None |
| Stop bits | 1 |
| Flow Control | None |
| Ethernet communication | |
| LAN | 10Base-T and 100Base-T |
| Data transfer rate | 10/100 Mbps |
| Protocols | TCP, IPv4, UDP, ARP, HTTP 1.0, ICMP/PING, DHCP/BOOTP |
| IP mode | Static, DHCP |
