20 t
Explanation:
The CRLC strain gauge is a type of force sensor that measures tension by having protective plates and washers on both sides to provide overload protection.
With its alloy steel construction coated with corrosion-resistant paint, the CRLC is protected to IP66 standards, meaning it is dust and water resistant.
These sensors are used for:
Overload detection
Measuring the weight of the load being lifted by cranes and lifting machines
Features:
• Protection against overloads
• Industrial protection IP66
Accessories:
• Junction Box J Box
| Parameter | Unit | Value |
| Maximum capacity (Emax) | kg | 20000 |
| Accuracy (OIML R60) | ||
| Maximum number of check intervals | ||
| Minimum check interval | ||
| Combined error | % | ≤ ±0.5 |
| Crawl Error (30 min) (DR) | %Emax | |
| Maximum safe overload | %Emax | 0 |
| Maximum Safe Lateral Load | %Emax | 150 |
| End Load | %Emax | |
| Stretch (Emax) | mm | 300 |
| Maximum supply voltage (Umax) | V | |
| Supply Current | mA | 10 |
| Output signal (at rated load) | Sayım | 1mV/V |
| Analog to Digital Converter (Sigma Delta) | bit | ≤ ±2.0 |
| A/D converter speed | Hz | 380±20 |
| Asynchronous communication speed | Baud | 351±3 |
| Data interface | ≥500 | |
| Angle measurement error | degree | -10…+40 |
| Insulation Voltage | V | -40…+80 |
| Temperature compensation range | °C | Steel |
| Operating temperature range | °C | IP66 |
| Strain gauge material | 5±%3 | |
| Sealing (EN60529) | 5 | |
| Weight | kg | 9.7 |
| Package Dimensions / Weight | cm/kg | 32x34x15 / 10.2 |
