100 kg
Explanation:
The PFT is a roll-type strain gauge developed for special applications. It is mounted on the pulley axis in winding systems and measures the load exerted on the shaft.
With its steel alloy construction and anti-corrosion coating, the PFT is IP55 protected, making it dust and water resistant.
Installation is easy thanks to the internal bearing. The sensor can monitor and adjust the tension of the material wound on the roll.
Features:
• Resistance to lateral forces
• Industrial protection IP55
Accessories:
• Junction box (J Box)
Technical specification
| Parameter |
Unit |
Value |
| Maximum capacity (Emax) |
kg |
100 |
| Accuracy (OIML R60) |
|
|
| Maximum number of verification intervals |
|
|
| Minimum verification interval |
|
|
| Combined error |
% |
≤ ±0.5 |
| 30 min crawl error (DR) |
|
|
| Minimum load |
%Emax |
0 |
| Maximum allowable overload |
%Emax |
150 |
| Maximum allowable lateral load |
|
|
| Limited load |
%Emax |
300 |
| Extension (at Emax) |
|
|
| Maximum supply voltage (Umax) |
V |
15 |
| Nominal output signal (Cn) |
mV/V |
2 mV/V |
| Zero Balance |
%Cn |
≤ ±2.0 |
| Input Resistance |
Ω |
385 ± 20 |
| Output Resistance |
Ω |
351 ± 3 |
| Insulation resistance |
MΩ |
≥ 500 |
| Temperature range (compensated) |
°C |
-10…+40 |
| Temperature range (operating) |
°C |
-40…+80 |
| Strain gauge material |
|
Steel |
| Gasket (EN60529) |
|
|
| Cable length |
m |
5 ± 3% |
| Cable diameter |
mm |
5 |
| Weight |
kg |
1.3 |
| Package dimensions/weight |
cm/kg |
14.5 x 23 x 6 / 1.5 |
Application areas:
Overload control systems
