100-200-250 kg
Explanation:
SPA is a platform-type strain gauge designed for precise single-point weight measurement. It has internal thermal compensation that corrects deviations in results caused by temperature changes and is resistant to inertial forces.
It is made of aluminum alloy with a corrosion-resistant coating, and the sensor area is insulated with a special chemical material, which provides industrial protection IP55. Suitable for platforms up to 80 × 80 cm, SPA is used in conveyor scales, roller scales and process scales.
Features:
Easy to install
OIML R60 certified
Industrial protection IP55
Accessories:
J Box Connection
| Model | Capacity | Minimum division | Maximum overload capacity |
| SPA 100 | 100 kg | 16 years | 100 kg |
| SPA 200 | 200 kg | 30 years | 200 kg |
| SPA 300 | 300 kg | 60 years | 300 kg |
| Parameter | Unit | Value |
| Maximum capacity (Emax) | kg | 100,200,350 |
| Accuracy (OIML R60) | C1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â C3 | |
| Maximum number of verification intervals | 1000 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3000 | |
| Minimum verification interval | Emax/5000 / Emax/5000 | |
| Combined error | % | ≤ ±0.05 ≤ ±0.02 |
| 30 min crawl error (DR) | % Emax | 0.0012 |
| Minimum load | % Emax | 0 |
| Maximum allowable overload | % Emax | 100 |
| Maximum allowable lateral load | % Emax | 100 |
| Limited load | % Emax | 150 |
| Stretch (Emax) | mm | ≤0.7 |
| Maximum supply voltage (Umax) | V | 10 |
| Nominal output signal (Cn) | mV/V | 2 ±0.1% |
| Balance at zero load | %Cn | ≤ ±1.0 |
| Input resistance | Ω | 409±6 |
| Output Resistance | Ω | 350 ±3.5 |
| Insulation resistance | MΩ | ≥500 |
| Compensated temperature range | °C | -10…+40 |
| Operating temperature range | °C | -40…+80 |
| Strain gauge material | Aluminum | |
| Sealing (EN60529) | IP55 | |
| Cable length | m | 2±%3 |
| Cable diameter | mm | 5 |
| Weight | kg | 0.55 |
| Package dimensions / weight | cm/kg | 7x18x12 / 0.6 |
